Modeling Modern Details

Model railroading is not a 'new' hobby - in some form it has been around for more than 100 years, and the hobby - like the industry - has changed over the years.  In the 1940's and 1950's, route-mileage peaked on the prototype, with spurs and branches into almost every town in America.  I can see where this would be a great era to model.

However, much of America's manufacturing base moved away from railroads before 1990, and that is what my generation grew up with.  We know very well that modern railroads have as many abandoned spurs as they do active ones, and a plausible eastern model railroad set in 1994 needs some abandoned spurs.

Details available to us today are remarkable and make the hobby very rewarding.  Here is a recent detail project that I completed on the M&E, replacing a frog on an 'abandoned' turnout with a section of jointed rail.  Frogs are high-maintenance items, and if there is no use of a side track, railroads can reduce track maintenance costs by removing the frog even if some of the rest of the turnout remains.  I used Details West rail joiner bar models to 'bolt' the new rail in place of the frog on this Shinohara #6 switch, and with the addition of some ballast and some grit, grime, and weeds, we have a nice mini-scene that helps illustrate the era of the railroad.

More details like these will follow as time passes - always plenty to keep us busy on the Onondaga Cutoff.

~RGDave

Marking the Rear End

A project that has been on the back burner for a while has been adding working marker lights to the rear end of my Amtrak train consist, in accordance with NORAC rules.  Amtrak is a tenant on the Onondaga Cutoff.  Conrail maintains the track, and Amtrak uses the Conrail main line for their Empire Service.  Any passenger train needs to have red marker lights displayed on the hind end, and while the new Walthers Amfleet cars come with the lenses installed, there is no provision for the distinctive red lights themselves.

These cars come beautifully detailed, but lighting was not included.  Walthers does sell a nice LED light board designed for these models specifically, and the cars include trucks and pick-up contacts installed from the factory.  Adding to the frustration is the tab system they include does not hold up to the installation process.  I therefore hard-wire the contacts between the frame and the board, which has proven to be much more reliable.  

For the hind end, though, lighting wasn't the only thing required.  Marker lights were still needed.  I therefore purchased a set of Miniatronics red surface-mount LED's pre-wired with leads, and included resistors to get the light to the correct intensity.  The results are worth it!

Lining this up was more work than it should have been, compounded by the fragility of the contacts and hiding wiring from view through the side windows.  But, in the end, now Amtrak 273 & 276 running via the Onondaga Cutoff will have the hind end properly defined!

~RGDave

Context, Details, and Maintenance Equipment

One of the things that working for a railroad can give you is lots of opportunity to observe the machines and people that make a railroad work - besides the trains!  While we all enjoy the trains themselves, the fact is that trains wouldn't roll if the property were not properly maintained.  Different departments work to maintain different aspects of the operation:  Track, 'B&B' (Buildings and Bridges), Signals, etc.

Scenery around the west end of Onondaga Yard has continued to progress.  With each small improvement, the context of the layout deepens.  Here's an overview of the scene at the big signal bridge supporting the westbound home signals for CP282, showing new ballast work, and the newly installed access road for the yard office:

And a quick snapshot of the signal bungalo for CP282, which has taken the place of the abandoned interlocking tower in the background:

In that first image, you can see a big knuckle-boom truck on the access road, headed towards the maintenance base that occupies some of the yard office area.  Built by my long-time buddy Mark in exchange for some weathering and DCC work, I only added some decals, window glass, and weathering to finish up his truck models for my fleet, each of which include scratchbuilt, resin-cast cabs, with kitbashed frames, wheels, and body.  

Here's a few shots of the current fleet at rest at the office.  First is a shot showing the rest of that area, which ends up being a good place to display the trucks behind the west end of the yard:

The trucks are not motorized, but are really beautiful models, with plenty of details!  Having a few of them fills a crucial role of adding important background for Onondaga Yard.  Most Conrail facilities would have a few trucks like these around, and Onondaga is no exception.  Here is a close-up of the boom truck:

 And finally, here is a close-up of the knuckle boom, the most recent and most intricate of the three models that Mark has delivered:

I am looking forward to getting more background and base scenery done, as it allows some of the real scenic detail work to begin in earnest.  All of that helps to set the feel of Conrail in the 1990's, as well as the feel of the area of Central New York that I am trying to convey.

~RGDave

Scenery & Close Clearances

Model railroaders always need more space.  I do, anyway.  Even where there seems to be plenty of space, we always squeeze in as much as we can, and Onondaga Yard is no exception.  Most of the Onondaga Cutoff will be built with narrower scenes than at Onondaga Yard, where I have almost 30" of space to work with between the front the fascia and the backdrop.   All that space is used by trackage in an effort to maximize capacity and efficiency at the yard itself.

This caused a bit of a challenge regarding scenery at the closest spot.  I want to model a wooded hillside behind the yard, based on what the scenery at Ram's Gulch looks like south of Syracuse where the railroad would run.   But cars were brushing against my test areas - even basic foliage requires more space than I allowed myself!  I decided a good solution would be to have a retaining wall at the tightest spot, modeled quickly from sheet styrene.

As you can see, after painting the styrene to represent aged concrete, and tracing some construction joints along the painted surface with a fine permanent marker, I simply glued the wall to the backdrop.  In the photo above I have started to fill in trees around the 'wall' which allows the hillside to look complete even where I did not have space for the trees.  Tracks here are, from right to left, the North Runner, and Park Yard tracks 4, 3, 2, and 1.  The painted backdrop above will soon be filled with foliage.  Here's a tighter view from track level:

The yard is without ballast or other details until the backdrop is complete.  Scenery is a messy process, and I want to avoid having to repair spills or damage on the ballast and track while working on the backdrop.  Here is a view west towards the Yard Office.

Finally, a quick shot from the aisle looking across the yard towards the backdrop.  Once this is filled with foliage, and then accented with the more finely-detailed 'super trees,' this scene will start to pop like the scene at CP 282 does now.  Then I can ballast the yard, add the access road and miscellaneous details, and step back to enjoy the view of long trains passing before moving on to the engine house scene!

~RGDave

COSE at CP282

Here's a video for your enjoyment - Conrail train COSE, behind recently activated C39-8 6002, comes to the top of the grade at CP 282 south of Syracuse, NY, as it heads east towards Selkirk.

The 6002 is a beautiful model of a General Electric C39-8 locomotive that I was able to get thanks to  J. Alex Lang.  I just finished the major project of adding DCC sound and lighting to it, and the results are here for you to see!

Next up is a bunch more scenery backdrop, fitting in around springtime activities!

~RGDave

Happy Mother's Day!

Construction of the Onondaga Cutoff would simply not be possible without the support and influence of my lovely, patient, strong, and beautiful wife Kristen.  Family comes first for us, and we feel it is the most critical and important unit in our society, and indeed in all humanity.  Happy Mother's Day to her, and to all mothers, everywhere!

Mother Nature brings flowers this time of year, and the Onondaga Cutoff is no exception; may your Mother's Day be filled with flowers of all kinds and may the peace and compassion of motherhood guide us all.

 

Thank you, to all the mothers in our world!

~RGDave

Just after Midnight

Warm summer nights trackside have formed some of my favorite railroad memories over the years.

Here's train ELSE (Elkhart, IN to Selkirk, NY) just after midnight, running several hours late as it arrives at Onondaga Yard on May 7, 1994.  It is passing eastbound through the plant at CP 282 before making a set out and pick up, and continuing on to its destination:

With reverence to those long nights, operations on the Onondaga Cutoff run on a continuous 24-hour schedule, which comes complete with a simulated sunset, overnight, and sunrise.  The layout has just enough lighting to make night operations possible, and more lights will be added as more scenery is completed.  Admittedly the lack of light adds complications for trains working in the yard or on darker, more 'rural' parts of the railroad, but that is in itself prototypical.  

Operators seem to enjoy the additional aspects of this, especially as it seems night time operations are rarely modeled.  The variety and challenge it presents adds to the operating experience.  Most sessions, given the 3:1 fast clock, see both daylight operations and overnight operations.  That means crews get to experience both sides of the coin, each time the railroad comes to life!

~RGDave