Wednesday, January 22, 2020

Hydrating Snooks Pond

Scenery along the main line of the Onondaga Cutoff near CP 277 has reached a point of completion where it is finally time to 'pour the water' into Snooks Pond. 

Snooks Pond, a small lake in Fayetteville, NY is one of the spots of my family's lore from Central New York.  The Deans moved all over New York State in the 1940's and 1950's as my grandfather's job with General Electric in the radar and sonar divisions moved from Syracuse to Schenectady, then to Syracuse again; then to Ridgewood NJ, then back to Syracuse.  During the Syracuse stays, the family lived in Fayetteville for a time in the 1940's, Ridgewood around 1952, and then settled in Skaneateles the second time in the mid 50's.  My mother tells the story of her younger brothers and the family dog building rafts for sailing on Snooks Pond during the early 1950's in Fayetteville, which were tested by the dog - and always sank.  The dog swam safety back to shore.  Snooks Pond would be a winter ice skating rink and fun park for the family - all in all, lots of nostalgia there.

When I laid out the route for the Onondaga Cutoff, following the geology and elevations through Rams Gulch along I-481, I noticed the alignment took us quite near Snooks Pond - and I smiled.  


I began by defining the area of the lake, and filling the terrain in to suit.  I masked off the areas I wanted to keep clean and mixed a batch of sculptamold to create the landmass.  


All contoured now and curing.


The area where the bungalow is for CP 277 has always struck me as awkward, with a narrow shelf for the bungalow.  This would have been a tower location on the original line, so I decided to add a retaining wall in the pond that would suggest a foundation for a former tower.  I filled in the back with sculptamold and shaped it to fit the look of eroded backfill.


As that cured, I cut clear plastic 'dams' for the area that will receive the pour of the two-part 'Enviro-Tex' epoxy that will be the base coat of the pond.  (I plan to add ripples to the surface later with a different product.)  The dam is sealed with caulk.


After the plaster cures, I painted it grimy brown-black and added static grass.


The final touches are a variety of plants around the edge of the pond, including swamp grass, cattails, bushes, and wild shrubs, from all sorts of sets I have collected from Scenic Express, MRC, and Noch.  

Now I will finish up those installations, paint the base and pour the water (GULP) - another permanent move that would be costly if I screw it up!

~RGDave

Wednesday, January 15, 2020

Thoughts on a New Decade

Welcome to a new decade - 2020 offers hope and a promise of tomorrow, as all new years do.  I am optimistic for this year and decade to come!  Still, though, sometimes a date alone is worth taking time to reflect.

I'll include few images of the recent operating session which upon processing and viewing have helped me think and ponder over the 'here &  now.'  


2019 was a year with new highs, balanced with several difficult lows.  I am realizing as time passes that some times of each year tend to be more prone to major shifts in energy, both on the layout but also in the larger context of life.  January has become such a time.  Early in life I'd be excited for snowstorms, for a cozy house on winter nights, for the chance at time off school, time trackside or working on models, and in later years time home from college.  Those memories are poignant and true, and remain where I somehow expect to be in January, even while life is so different from those days, all more than 25 years ago now.  


Today, firmly rooted in adult life, January carries more weight as well as expectation.  January now carries more awareness of darkness, and memory of things beyond my imagination 25 years ago.  My current sense remembers my father's death 4 years ago this month.  I'm more reminded of that this year than I expected.  These days in NJ there is less snow to be excited about, thought my excitement for a good storm remains.  I am aware of the weight of winter finances, family responsibility while recovering from holiday spending, making acute other financial considerations and that subsequent responsibility.  Work dominates the days and weeks before trailing off most nights and weekends, but to a higher degree than I'd hoped it still requires energy and interactions after hours.  Official volunteer activity similarly adds a layer of stress.  And it is my house that we work so hard to keep cozy, creating memories for my kids and my wife and I alike.  


Mixed in with all that is this wonderful hobby which is truly in a golden age.  My family is healthy, which makes all other issues pale in comparison.  I have my health, a true blessing in a world of uncertainty.  And so I offer this as food for thought:  it is the Great Balance that is so perplexing.  I think there is a lot to be said for 'sitting' with the energy of our times, of the seasons and weeks and days, and reflecting on our being present with that energy, whatever it is.

Worth noting is that our first ever operating session on the Onondaga Cutoff was in October 2011, and it is hard to believe that makes 2020 the TENTH year of operations on the layout.  More to come on this as we approach this important milestone!

For me, and for many of us that model, I feel the hobby has a role in keeping us centered.  Ours is a real, tangible hobby, and one you can't really fake.  Either you create models or you don't.  You either read a few books or references or you didn't.  You attended operating sessions, or you didn't.  You have to have jumped in somehow to be part of the hobby.  That clarity of purpose is important for people and it's something I am thankful for.  The Onondaga Cutoff was built with the hope of satisfying operations, and keeping alive memories from a younger, more innocent life that I had when I was 10, 12, 16 years old, even 20 and 24 years old.  It has exceeded expectations on both.  

I feel a great deal of gratitude this January.  Even though fighting a nasty cold and dealing with all there is to deal with, I am just so thankful for those that I join and that join me on this journey.  The amazing people in my world make this hobby and its operating sessions so worthwhile, and add to life in many ways beyond the hobby.  It is literally a hobby - and a life - of 'better together' and that is how I want to embrace it.  

Here's to the new year, and decade!

~RGDave

Friday, December 20, 2019

4-pack for the Holidays

4-Packs are standard fare for many items, and in the world of craft beer it usually means something worth trying.  Today, though, it's a 4-pack of locomotives - four of a kind all finally programmed and weathered up for service.

Rapido's B36-7 as you have seen before here and other places online is a real work of art, an incredible model in looks, sound, and operation.  The detail and paint are fine and as good as any paint on the market.  I took extra time with the programming and the weathering to make sure those lived up to the high bar established by Rapido, and so here we are:

TV14 at CP282, Onondaga NY, September 1995
I am really thankful for these long-awaited models, they fill a huge hole in the Onondaga Cutoff roster as well as the roster of any Conrail, Seaboard, or CSX intermodal modeler.  I followed my usual protocol with the weathering - masking windows and lights first, then a dark wash of thinned dark brownish-gray paint to highlight the doors and give some depth to seams.  That cures overnight, then a overspray of dullcoat, followed by airbrushed dust and mud on the underframe and an overspray of beige to fade some of the paint.  Once that cures, I finish with powdered pastel chalks and some dry brushing.


Finally having a small group of these means that we finally get the 'fleet' feel for these machines.  With 60 B36-7's on the roster, they were somewhat common on mainline trains.  However, add in that these were mostly focused on the routes that hosted intermodal trains and they suddenly seem very common for the Chicago Line.  Nearly every piggyback or intermodal train in the early 1990's had one or more of them in the consist.  


This was a pretty great way to spend some late nights finding some 'peace' after the craze of work during the holidays.  The kids are wired each night and it feels like we are always moving at 100 miles per hour - it's too fast, and it needs to be manually, mindfully slowed down sometimes.  Weathering is a time-consuming but satisfying process that slows down those moments we need to really appreciate things sometimes.  

Teddy at 5, Pete nearly 3, Susie at 7-1/2. 
The Abeles, December 2019
As 2019 draws to its close, I have a lot to think about.  It has been a bewildering year.  We Abeles are finally coming out of some of the craziness of having an infant or baby in the house continuously for the last 7-1/2 years.  Raising kids is awesome, demanding, incredible, and it is hard work.  My wife amazing, smiling and happy and hard working on these kids so much of the time.  Each day, each of these little people develops, grows, and is becoming a person you can speak with, laugh with, and enjoy.  For sure, then, we also have hard days, dark days, sad days.  We all can do better.  And whether a good day or a hard one, it's a blessing and should be appreciated.  

Merry Christmas, Happy Hanukkah, best wishes from us to you all into 2020!

~RGDave 

Friday, December 13, 2019

More B36-7 Goodness

Conrail modelers have had an amazing run of luck with manufacturers lately.  In the last few years, we have racked up beautiful, superdetailed models of H58 boxcars (Tangent), PS 4785 (ScaleTrains) and now PS 4750 (Tangent) covered hoppers, insulated 50' boxcars (Moloco), high-cube auto parts and appliance cars (Exactrail), coil cars (Exactrail, Tangent), all of which are incredible but are in some ways outdone by the locomotives - ScaleTrains C39-8's and SD40-2's, Athearn Genesis GP38-2's and GP40-2's, Atlas GP40-2's, GP40's and GP38's, and now the incredible Rapido B36-7. 

This is an embarrassment of riches compared to the 1990's and 2000's when we were kitbashing and hand-painting models!


As seen in the review from last month, the models themselves are amazing.  After all four were programmed, I speed matched them to a test engine (Kato 6345 seen 4th out above) and then added all four to a consist for some break-in runs.  


I did have some challenges programming these, with the new ESU Loksound 'V5' decoders.  My usual approach of JMRI (Java Model Railroad Interface) wasn't as useful as it had been.  In the end I had to make the investment in the proprietary 'LokProgrammer' which isn't cheap and is yet another thing to manage, but in the end, it did work, and is intuitive after a few hours of fiddling.  

Admittedly the sight and sound of these consisted makes up for most of that frustration.  


I can write the LokProgrammer experience in a future post, too, which may help keep that for posterity and maybe help someone else who was befuddled by the need for it.

Weathering is up next.  These are going to add a tremendous amount of variety to operations on the Onondaga Cutoff.  The layout has benefited from all this top-quality rolling stock.  The roster is nearing a state of completion, with the only major exception being modern-tooled and DCC-equipped six axle Dash-7's.  If a manufacturer announces C36-7's, C30-7A's and C30-7's, I'm going to need a loan to finish off the fleet!

~RGDave

Monday, December 9, 2019

Long Winter Evenings

As the Holidays come and go, we're reminded of good memories and challenging ones, of time with friends and family, and perhaps a nostalgia of times gone by.  Model Railroads can be great time machines and the Onondaga Cutoff is no exception.

Here's a view, courtesy of regular operator Doug Watts, showing Conrail B23-7 1987 idling on the fuel pad at the Onondaga Engine Terminal shortly after 5 a.m. at the most recent operating session. Doug's camera captured the background sky with the light of the coming dawn, and it's looking a lot like the 1990's in this image!



With that sleepy image, I wish you all a Merry Christmas, Happy Hannukah, or best wishes for your holiday of choice.  It has been an up and down sort of year for me and my community but a decidedly 'up-year' for the Onondaga Cutoff.  Persistence pays off!

~RGDave

Tuesday, November 26, 2019

Rapido B36-7: Looking Great

Just a few days ago, a nice box arrived in my mail with three beautiful Rapido boxes inside.  A fourth is coming soon:  the arrival of the long-awaited, much anticipated B36-7, a staple on any Conrail route with intermodal trains in the 1980's and 1990's, and one of the critical models for operations on the Onondaga Cutoff.

Before traveling for a few days, I had time to unbox one of them, Conrail #5054, one of the neat engines that remained in original paint until the end of the 1990's.  Here we go:


This is an absolutely incredible model to see firsthand.  The color is perfect to my eye.  The overall look captures that husky-yet-soft appearance, and the dimensions I could verify check out.  The Conrail-specific stuff is amazing - cab signal box, marker lights, ditch light placement, battery box doors, horn placement, all perfect.

The model was reported by Rapido to come with too many snubbers from the factory, and indeed that was the case with this one.   A gentle but firm twist with a hobby knife for a few seconds and they popped off.  Rapido on one of their recent videos also said they would offer replacements if you aren't satisfied.  The photo above is after their removal.


I programmed the address to 5054, and started to test the lights.  Ditch lights are installed on this one, and they and the headlight look great.  Nice and bright, LED but 'day glo' or whatever these are called these days.


Next, we turn on the marker lights, which glow beautifully red just like the prototype.  Conrail did not use marker lights like other railroads by this date, and so elected to use lights that could be off or lit red only.  Rapido captured the look perfectly!

Sounds are the best I've heard from the factory, crisp and chuggy like the real GE's.  Amazing.  Operation is smooth and steady.  

My only complaint besides the obvious issue of the extra snubbers would be the programming of the decoder; the lights should all be controlled independently of direction.  Instead, the markers are lit on the trailing end only, and the head and ditch lights on the leading end only.  But, I can change these with the right CV's and will do so once I hear back from Locsound.

More to come as the others get unboxed and weathered up; what a great step forward for Conrail modelers!

Finally for tonight - my best wishes to you all for a happy and healthy Thanksgiving.  I believe we have a lot to be thankful for here and am looking forward to the future!

~RGDave

Thursday, November 21, 2019

Mmmmmm...Beer

After a few late nights and some help from my son Teddy, we have reached the wonderful 'finished but not complete' stage of things at Doelger Brewery!   The last few episodes discuss the process so I won't dwell long on it here.  With the glue cured and the scenery in place I added a few more tufts of weeds as well as some extra grit and the place is off and running.


Here's a view of the Barley Track, where inbound dried grains arrive in covered hoppers and are unloaded into the grain silos before roasting into malt.  Once malted they are stored until needed for the brewing process.


The metal 'sarcophagus' protects workers and the product from harsh Central New York winters.  Next is the brew house, which boils water and cascades it over the malted barley and oats to extract the flavors and sugars from the grain, which are in turn cooled and put in fermentation tanks with yeast.  Yeast eats the sugar and creates alcohol and carbon dioxide.


I added more lighting and a detailed interior to the structures so at night they would appear to be maintained and in use.


Finalizing the brewery trackwork allowed me after 8 years (!) to finish the scenery around Euclid Yard, and detail out the track and roads.  The scene came together well!

The timing worked well too to now give me a week or two to make some running repairs on cars that have been waiting for time, just ahead of the arrival of the magnificent Rapido B36-7's later this month.  One of the great pleasures of this hobby is that we can swing from the open, creative process of scenery to the linear, mechanical process of rolling stock maintenance.  

I will get some early photos of the B36-7's up here.  2019 is really turning into quite a year and we have a lot to be thankful for heading into the holidays!

~RGDave